 |
| |
| How to Shorten a Zipper |
| |
|
|
How to Shorter a Zipper: Before | | 
How to Shorter a Zipper: After |
|
| |
|
|
How to Shorten a zipper
It can be difficult to find a 3 inch zipper for a small pocket or embellishment on a handbag. The good news is any closed bottom zipper can be shortened. There are two methods—from the top or from the bottom.
To shorten from the bottom:
1. Close the zipper and measure the desired length. (For an invisible zipper, add 1” )
2. Whipstitch tightly across the coil o rteeth 8 to 10 times with a double thread.
3. Cut the zipper ½” below the stitches.
To shorten from the top:
1. Measure the desired length of the zipper or install the zipper, placing the bottom stop at the desired length.
2. Open the zipper. (Very Important! This assures that the slider will be BELOW the cut.)
3. Stitch a bar tack by hand or machine over the teeth on one side of the zipper using matching thread.
4. Cut off the excess zipper.
|
| |
|
|
Tips Archive:
| | Other Tips:
March 07, 2010 - How to create a Button Shank
February 19, 2010 - NEW IHDA category: Most Innovative Handbag Inspired by mark.
January 03, 2010 - Topstitching tips
September 20, 2009 - How to Miter a Corner
August 16, 2009 - Free Motion Monogram
July 12, 2009 - Bound Buttonholes
May 17, 2009 - Centered Zipper Application
April 12, 2009 - Bias Bound Seam Finish
March 15, 2009 - Smocking
February 22, 2009 - Slotted Seam
January 18, 2009 - Mock Flat Lock seam
December 14, 2008 - French seam
November 15, 2008 - Flat-Fell seam
|
|